| Roofing systems :: SYSTEM 07
:: SYSTEM 07
 |
- Two-layer covering
- Fixing by welding ventilated without insulation
- Thermo-insulation:
- mineral wool plates
- polystyrene plates
- mineral wool plates coated with bitumen
- polystyrene plates laminated with bitumen paper
- conrete base
|
- The concrete base, grounded.
The base made with a slope in the construction layer or thermo-insulation layer (declining plates). Slope min3%, max.20% - Steam insulation – weldable membrane or poly- ethylene steam insulation plastic foil In case of repairing the old covering it is necessary to clean and level the irregularities of ground. In the places of damages weld few layers of membrane or use the filling mass and then ground the whole.
- Thermo-insulation
- roofing wool plates or roofing polystyrene plates e.g. FS20
- roofing wool plates coated with bitumen or polystyrene plates laminated with bitumen paper - Base sheet membrane
- mechanical fastening together with thermo-insulation to the ground with fasteners, 3 to 9 pieces/m², depending on the roof area, membrane IZOBIT G200 S40 and IZOBIT SUPER P-PYE 150 S30 SBS, mineral wool plates, polystyrene plates, mineral wool plates coated with bitumen, wool plates laminated with bitumen paper.
- fastening by welding to thermo-insulation fastened with mechanical connectors to the ground, base weldable membranes; We recommend glass fabric or polyester mat membranes e.g. IZOBIT G200 S40 or IZOBIT SUPER P-PYE 150 S30 SBS, wool plates coated with bitumen, polystyrene plates laminated with bitumen paper. - Mechanical connector (the type depending on the ground and thickness of the whole system), fixed on along and across tucks of the membrane.
- Top covering membrane - fastened by welding- all membranes from our offer based on polyester mat warp e.g. IZOBIT SUPER W-PYE 200 S5 SBS
Purpose:
New roof covering or repair of the old
|
