| Our products :: Traditional Bitumen Papers :: P-333/1100
:: P-333/1100
 Asphalt base sheet membrane based on cardboard (PN-EN 13707:2006, PN-EN 13969:2006)
Application: |
Paper I/333 is used for making anti-dampness horizontal insulations - floor insulations, foundations, concrete flooring in the conditions of lack of influence of hydrostatic water pressure. Paper I/333 cannot be used for roof coverings, waterproof insulations exposed to water pressure influence, vertical insulations of the underground parts of buildings and walls, steam insulation, horizontal insulation of terraces. |
| 1. Mineral surface | | 2. Oxidized asphalt | | 3. Cardboard 333 g/m2 | | 4. Oxidized asphalt | | 5. Mineral surface |
| Visible failures |
| product with no visible failures |
| Dimensions |
| Length |
min 15,0 m |
| Width |
min 1,0 mm (± 10) |
| thickness |
2,6 (± 0,6) kg/m² |
| Water resistance at the pressure of 10kPa |
| Meets the standards |
| Fire reaction |
| class E |
| Maximum stretching power |
| Direction along |
400 (+200, -100) N/50 mm |
| Direction across |
250 (+150, -100) N/50 mm |
| Lengthen at maximum stretching power |
| Direction along |
6 (±4) % |
| Direction across |
6 (±4) % |
| Linear dimensions |
| deviation not more than 30mm/15m of length |
| Flexibility at low temperature |
| inadmissible arising of cracks at the (higher or equal) temp. of 0oC |
| Flow resistance at the higher temperature |
| inadmissible flow at the (higher or equal) temp. of +70oC |
| Vapour filtering |
| µ = 20 000 |
| Hit resistance at h= 300 (±5) mm |
| Product resistant for punctures ø >= 20 mm |
| Static load resistance |
| up to 10 kg |
| Endurance of joint (cutting resistance) |
| Direction along |
300 (+100, -150) N/50mm |
| Direction across |
400 (+200, -150) N/50mm |
| Tear resistance (nail) |
| Direction along |
100 (±50) N |
| Direction across |
100 (±50) N |
| Stability |
| (water resistance after artificial ageing) |
Meet the standards |
| Chemical resistance |
In accordance with the annex A to the standard PN-EN 13969:2006 |
Additional information:
- type of warp : Cardboard
- type of asphalt mass
- impregnation mass: asphalt
- coating mass: Oxidized asphalt
- type of finishing surface
- upper surface: Mineral surface
- lower surface: Mineral surface
- type of product in accordance with PN-EN 13969:2006
- A (anti-dampness)
|
